Features
1. Perfect touch, classic double sided, full keyboard curve modelling design;
2.Adopting low power consumption 2.4G wireless connection, with strong anti-disturbance ability, also with LED indicators to indicate the connection status;
3.Supportlow voltage work:3.6-4.2V;
4.With intelligent Anti-shake algorithm to make sure the mouse cursor stable and smooth;
Warning: This operation may disconnect the original paired connection, please operate with Cautions.
1. Plug in the USB dongle receiver, keep the distance between the remote control and the pc with in 10cm. And make sure there is no remote control and receiver connection.
2. Press the “Vol -” and “Vol +”keys for 3 seconds, the green indicator stop blinking. Then loosen the keys, then the green indicator start blinking.
3.When the green indicator stops blinking ,pairing succeeds.
Note: If the Pairing do not succeeds, you need to re-operate.
Sleep and wake up
1.In order to prolong lifespan of the battery, when the remote controller is stationary for more than 20 seconds, it will turn into hibernation mode. Press any key to wake up the remote controller.
2.When the low voltage (green light 2Hz slow flashing) is detected, it will sleep after 20 seconds.
Cursor calibration
It has an automatic calibration function, when the mouse not accurate or drift, you can put it on the desk for two seconds, it will back to work.
Note: When calibrating you need to keep handles absolute rest, if there is movement, the calibration data may not be correct, you need to try again.
This product has five levels speed
Speed up:
Pressing "OK" and “up “3 seconds (Green light flashes once)will accelerate a gear. Slow down:
Pressing "OK" and “down “3 seconds (Green light flashes once) slow down a gear.
Indicator
There are 1 double color indicator on the remote controller, that is the green indicator and the red indicator.
Green Indicator:
1.When the remote controller is well connected, the green indicator will keep turning on;
2.The green indicator starts 5Hz Rapid flashing, it shows that the remote controller is not well connected, please check whether the receiver is well connected to the host or not, or the receiver is covered by some metal objects.
3.The green indicator starts 2HZ Slow flashing, it shows that the remote controller is low voltage need for charging.( This case appears 20 seconds, the remote controller automatic dormancy.)
When the red indicator on, it means that the remote controller is charging. Fully charged, the red light goes off.
1.Battery: Keep the battery with enough power. When the voltage is low, the stability of mouse cursor will be affected.
2.Working Distance: The actual working distance of this remote controller will be affected by electromagnetic field. Please make sure the receiver has not been covered by metal items.
3.Pairing: The pairing has been finished before the remote controller leaves the factory. This function can only be used by distributors.
For more information:
http://www.astarias.com
sales@astarias.com
